AZBOND C Activator (Catalyst) — Refill for AZBOND C Glue
AZBOND C Activator (Catalyst) — Refill for AZBOND C Glue
Order AZBOND C Activator only (the catalyst for AZBOND C two-part PVC/polyurethane inflatable boat & packraft adhesive). Ideal if you still have glue but need more activator. Mix at 5% by volume.
Activator/catalyst refill for AZBOND C two-part adhesive
Compatible with PVC & polyurethane boat fabrics (packrafts, inflatables)
Use rate: 5% by volume (check your glue tin for instructions)
Small glass jar (activator only) ~15ml
Need glue + activator? See the AZBOND C 250ml Kit
The AZBOND C Activator is the catalyst component for AZBOND C glue, a two-part adhesive specifically formulated for PVC and polyurethane (TPU) inflatable boat and packraft repairs. Choose this activator-only option when you still have an unopened or partially used tin of AZBOND C glue but have run out of the catalyst.
Mixing guidance: add 5% activator by volume to AZBOND C glue, then use per your standard bonding procedure. For full instructions and best-practice tips, refer to the printed gluing guide included with all AZBOND C 250ml kits from Pack Raft Australia.
If you require both components, purchase the AZBOND C 250 ml Kit.
FAQ
-
This is catylyst activator only; the glue is not included.
-
PVC and polyurethane (including TPU) coated boat/packraft fabrics.
-
5% by volume. Use the included measuring pipette that comes with kits purchased from Pack Raft Australia to ensure the correct ratio. If you guesstimate the ratio, the bond may not be long lasting.
-
Approximately 15ml
